18
TILT AND EXTENSION HANDLE OPERATION
Your Riptide SE trolling motor features 7 usable handle tilt positions... 45°, 30°, and
15° up and down from the 0° (horizontal) position. To use the down positions, you
must first press the release button located on the left underside of the pivot handle.
Your Riptide SE trolling motor handle also features a unique stow position, that is useful
for limiting the amount of space required for storage or travel.
First press the release button located on the left underside of the pivot handle, then
push the handle down until you feel the handle “lock in” to the stowed position. This
will be almost parallel to the motor shaft.
To extend the handle, pull the handle towards you to the desired position. The handle
will extend a full 6 inches. To retract, push the handle in until it meets the face of the
motor control head.
IMPORTANT:
THE MOTOR MUST BE IN THE OFF POSITION TO USE THE
STOW POSITION! FAILURE TO PUT THE MOTOR IN THE OFF POSITION
BEFORE STOWING THE HANDLE WILL RESULT IN JOINT FAILURE.
minnkotamotors.com
51
12v
24v
36v
M + R
OUGE
M – NOIR
TABLEAU DE CONTRÔLE
NOIR
JAUGE DE LA BATTERIE
BATTERIE
12 V 1
B – NOIR
B + ROUGE
MOTEUR
BOUTON DE RÉGLAGE DES VITESSES
ROUGE
COMMUTATEUR DE VITESSE VARIABLE
BATTERIE
12 V 1
BATTERIE
12 V 1
BATTERIE
12 V 2
BATTERIE
12 V 3
BATTERIE
12 V 2
