11 | minnkotamotors.com
©2022 Johnson Outdoors Marine Electronics, Inc.
a. With the Gas Spring disconnected and the Steering
Module removed, ensure that the mount is in the
deployed position.
The length of the Cable on the Pull Grip and Cable can be adjusted based on personal preference. Before beginning the adjustment,
the Gas Spring must be disengaged and the Steering Module must be removed. Please refer to the Removal of the Steering Module
section and follow the procedure to Disconnect the Gas and Remove Motor from Mount. It is important to remove the Gas Spring and the
Steering Module in order to access the Cable and associated hardware to make any adjustments.
NOTICE:
Observe how the Cable is routed through the
Cable Guide, around the Pin, and into the Latch/Strap
Cable Pull Bracket.
b. Locate the end of the Cable and the Pull Cable
Clamp inside the Aluminum Arm of the Mount.
Rope
Rope
Guide
Guide
Mount
Mount
Pin
Pin
Cable
Cable
Cable
Cable
Latch Strap Cable
Latch Strap Cable
Pull Bracket
Pull Bracket
Pull Cable Clamp
Pull Cable Clamp
Adjusting the Pull Grip and Cable
1
WARNING
Please refer to the Removal of the Steering Module section of this manual and follow the procedure to Disconnect the Gas
Spring and Remove Motor from Mount. It is important to remove the Steering Module and Remove the Gas Spring in order to
access the Cable and associated hardware to make the adjustment. Failure to complete these necessary steps will prevent
the adjustment from being possible and will result in risk of injury.
1a
1b