background image

 
 

 
 

Technical specifications 

 

SNIP L MINIPLANE and WAY RICHLY MINIPLANE

  comes with the front mount container.  

It consit in a 33cm cylinder , 13cm in diameter

,

 with possibility to attach instruments on top of it

.  

optional - a container designed as instrument panel with map holder and compact 5l  ballast pocket.  

 

 
Applications  
  

SNIP L MINIPLANE

 was designed and tested as a paragliding and paramotoring  reserve chute.  

WAY RICHLY MINIPLANE

 

as a second spare  paragliding reserve chute 

They was 

not

 designed or tested for use in skydiving or base jumping , and such as has to be used  with [certified] 

paragliding harness only. 
 
 
Components  
 
        - canopy, main and central lines, bridles 
        - outer and inner container 
        - two bridle straps used for attaching with  harness’s hanging points 
 
 
Operational time limits 
  
  Ten years fitness is guaranteed only  if: 
    -  manufacturer or authorized dealer service performs 5 year warranty check and following year checks. 
    -  every 12 months repack  is provided by manufacturer or authorized service 
    -  after every use, when reserve chute was deployed, opened and flown, it was sent for check to manufacturer   
  
 
Maintenance 
 
- store reserve chute in dry and clean  place 
- due to used materials, avoid any direct sunlight. UV rays cause fast deterioration of canopy materials, so never 
expose it to extended direct sunlight 
-  check after flying in rain if reserve is damp. If yes, dry it immediately to prevent  mildew damage  
-  if reserve gets in contact with salt water, rinse it as soon as possible with fresh water and dry it 
-   if soiled with grease, oil or other chemicals, it has to be send to manufacturer for check up. Grease, oil or 
chemicals can destroy  materials. 
-  while in transport it should not be exposed to temperature above 50c 
 
 
Repairs  
 
  - all repairs have to done by manufacturer. Any unprofessional interference or modification can cause reserve chute 
failure and manufacturer cannot be  responsible for any of it 
  
Checks  
 
  -  before every flight it is necessary  to check whether outer container is secured by reserve pins so it does not open 
spontaneously 
  -  reserve chute has to be regularly repacked, thanks to used materials repack period can be extended to 12 months.  
IT IS NECESSERY TO MAINTAIN THIS PERIOD, if not repacked for extended time it can  prolong the opening . 
  -  every repack has to be kept on record in service book 
 
 

Summary of Contents for SNIP L
















Reviews: