14
WARNING
To avoid damages to the meter or to the devices under test, disconnect circuit
power and discharge all the high-voltage capacitors before the inductance
measurement.
1. Press “
” to turn on the instrument.
2. Press “FUNC” to exhibit “LP” in the display, selecting the inductance measure
mode.
3. Insert the inductor in the test input or connect the test lead to perform the mea
-
surement.
4. Press the “FREQ” key to select the appropriate test frequency.
5. Press “D/Q/
θ“ to select the measure assistant parameter.
C. CAPACITANCE MEASUREMENTS
WARNING
To avoid damage to the instrument or device under test, disconnect circuit
power and discharge all high-voltage capacitors before to effect the mea
-
surement. Use the measurement of DC voltage to confirm that the capacitor
is discharged.
a
MX-1050
Figure 13
