MINIMOTO
™
MOTOCROSS BIKE
MINIMOTO
™
MOTOCROSS BIKE
CIRCUIT BREAKER:
IMPORTANT:
Circuit breaker information and reset:
Your MINIMOTO
TM
MOTOCROSS BIKE has a
built-in circuit breaker. This is located near
the Charging port
(Fig. 31)
The circuit breaker shuts the electrical
power down if it detects too much cur-
rent being used. This protects the
electrical components from extreme
abuse. The circuit breaker may trip if
the vehicle is going up a steep hill, has
too heavy a load, or the wheels are
blocked for some reason.
THE MOTOCROSS BIKE WILL COMPLETELY
SHUT DOWN WHEN THE POWER OVER-
LOADS. Check to see if the black button
in the center of the circuit breaker has
"popped up". To reset the circuit breaker,
wait about 10 seconds for it to cool down.
Turn the key off. Press the black button
down to reset. When reset the button
stays down. If the button does not stay
down, wait until it has cooled down
enough.
Once the circuit breaker has been reset,
turn the key to the ‘on’ position and
resume riding as normal.
IF YOU LOSE THE KEYS:
NOTE: Replacement keys can be ordered
from the Minimoto Service Center for a
fee. You can also have your key duplicat-
ed at any key shop or kiosk. It is a good
idea to store an extra key in a safe place.
21
Fig 31
CIRCUIT BREAKER