15
ENGLISH
3. Allow the unit to cool off completely before putting it away.
4. Do not leave the device unattended whilst it is being used.
5. Always use the device with the original basket or base that was provided with it.
THIS UNIT MUST ONLY BE USED IN A DOMESTIC SETTING AND EXCLUSIVELY
BY ADULTS.
4. PRODUCT FEATURES
4.1. DESCRIPTION OF THE PARTS
1. Main body
2. Control panel
3. Adaptor ring
4. AC plug
5. Heating basket
6. Base for sterilisation
7. Hood
8. Hood handle
9. Measuring cup
10. Time indicator
11. Selector to reduce
12. Selector to increase
13. On/off switch
14. LED power status indicator
15. LED sterilisation/heating cycle in progress status indicator
5. INSTRUCTIONS FOR USE
5.1. HEATING FUNCTION (baby bottle, water for formula or jar of baby food)
This device is suitable for heating a baby bottle or a jar of baby food. Remember
that jars of baby food must only ever be inserted after previously removing their lid.
For safety purposes, always check that the temperature reached after heating is the
desired one.
1. Place the device on a suitably flat surface, making sure that it is out of the reach of
children.
2. Insert the plug into the electrical socket. A beeping will be heard and the LED power
status indicator (14) will illuminate with a green colour.
3. Add to the heating tank the volume of water stated in the tables shown below in this
section according to the volume and temperature of the baby bottle/food.
4. Insert the receptacle to be heated into the body of the device contained by the
basket (5).
IMPORTANT: Always use the heating basket. The baby bottles or jars of baby
food must never come into direct contact with the heater, since this could mean
that heating is not optimal and the baby bottle/jar of baby food could be damaged.
5. Push the power button (13) to turn the unit on. The pre-set time on the device will
appear flashing on the display (10).
6. Using the selection arrows (11 and 12), increase or decrease the heating time
according to the information shown in the guide tables which are set out below.
Then, push the power button again (13).
7. Following this, the LED which indicates the heating cycle in progress (15) will
illuminate with a green colour, and the device will commence operation.
Summary of Contents for Warmyplus digy
