english
7
Please read these instructions carefully before use. Keep them close at hand so that you can refer to them later.
Technical characteristics:
For use at home:
Power input: 220/230V
~ 50 Hz
Wattage: 320 W
For use in car:
Power input: 12V DC
Wattage: 100 W
Conforms to European standards
Important safeguards
· Before using the appliance for the first time, check that the voltage of your electrical mains system is compatible with it.
· The bottle warmer should always be placed on a flat and dry surface, out of reach of children.
· Do not let cord hang over edge of table or counter, or touch of hot surfaces.
· Do not move the appliance when in use or if it contains hot water.
· The bottles should be placed in the Bottle Tray, with the ring slightly loosened.
· By food jars should be heated with their tops removed.
· Always place the trays (BottleTray and/or Baby Food Tray) in the chameber to heat up bottles and baby food.
· Never turn on the appliance without having filled the tank with the required amount of water (the water used should be
free of additives).
· Allow the bottle warmer to cool for approximately 15 minutes between uses. Never touch the inside of the chamber
during or just after operation.
· Don't forget to unplug the appliance after use.
· Never immerse the appliance in water or any liquids.
· If you detect that the liquid in the baby bottle isn´t hot enough using the indicated water measurements (in baby bottles
that hold less than 210 ml), we recommend that you add more water to the baby bottle heater. In this case, we advise
you to use 8 ml water. However, it is necessary to check the temperature before giving to the baby.
Indicator light
Adaptor ring
Bottle tray
Mains power cord
Heating chamber
Car adaptor plug
Measuring cup
ON button
Baby Food Jar Tray
steam cover fits