Thanks to the special transmission technology called Zero Emission, when
the baby unit stays on stand-by, it does not emit any radiation.
The baby monitor will automatically go to monitoring mode if VOX is
activated (if the sound level in the baby side goes beyond the threshold of
VOX sensitivity setting).
If you want to manually put the baby monitor in standby mode, press the
Sleep / Wake up button (b) in the parent unit to put the baby monitor into
sleep mode.
And to start up the baby monitor, press the same button (b) to put the baby
monitor into monitoring mode.
5.2.8. Paging
It helps to find a mislaid Parent Unit. And also useful if one parent is in the
baby’s room and needs to contact the other.
During sleep mode, press the Page button (9) in the baby unit, a double
beep tone alert will sound on the parent unit. Press OK button (a) in the
parent unit to stop this tone.
5.2.9. Talk to the baby unit
Press and hold the Talk button (a) in the parent unit to send voice to the Baby
unit. The intercom function will be active while pressing the Talk button (a).
5.2.10. Night light
In the baby unit, press the night light button (1) to turn on the night light,
press again to turn off.
5.2.11. Pairing the units
The baby monitor has been paired in the factory. If connection cannot be
established automatically, turn on both the baby and the parent unit, press
the UP button (f) in the parent unit for 2 seconds, the baby monitor will be
paired automatically.
