Caution:
Risk of explosion if battery is replaced with an incorrect battery
type. Dispose of the used batteries according to the instructions.
Note:
Both Baby monitor and parent unit have a built-in battery power save
feature to make the batteries last longer. When you are not using both units,
it is recommended to switch off to save battery power.
5.2. OPERATION
Position the Baby unit at least one metre from your baby. Never place the
baby unit inside the baby’s bed or playpen.
5.2.1. To Turn On/Off the units
Baby unit
• To turn ON the baby unit press and hold the power button (5) for 5 seconds.
The power LED (4) will turn on and a beep tone will be heard.
While there is no connection between the units the LED will be red.
• To turn OFF the baby unit, press and hold the power button (5) for 3
seconds. The power LED will turn off and a beep tone will be heard.
Parent unit
• To turn ON the parent unit press and hold the power button (e) for 5
seconds. The LCD display, power LED will turn on and a beep tone will be
heard.
While there is no connection between the units, the LED will be red.
• To turn OFF the parent unit press and hold the power button (e) for 3
seconds. The LCD display, power LED will turn off and a beep tone will be
heard.
The Baby Monitor will be automatically connected. When connection has
been established both units, the LEDs on both units will be green.
5.2.2. Monitoring mode selection
There are 2 modes for monitoring
- Video Mode
- Audio Mode
5.2.2.1. VIDEO mode operation
The video mode allows you to monitor your baby through images and sound.
Due to the fact that this is baby monitor is DECT based, you may observe
a minimum delay in real time of the live image being transmitted on the
monitor screen.
