16
ENGLISH
Problem
Possible Cause
Solution
Interference or poor
reception
Other electronic devices may be
interfering with the signal
Move them away from the device
The camera and monitor may be
too far apart
Move the monitor closer to the camera
The battery power may be too low
Plug in the power adapter
The camera or monitor may be
placed too close to many metal
objects
Move them away from the device
You cannot charge the
battery in the parent unit
The AC/DC adapter is not plugged
in
Plug in the adapter
If the Baby Unit has lost
its link with the Parent Unit
The camera and monitor may be
too far apart
Move the monitor closer to the camera
The link between both units has
been lost momentarily
Reset the units by disconnecting them
from the electrical power. Wait about 15
seconds before reconnecting. Allow up to
one minute for the Baby Unit and the Parent
Unit to synchronize.
The link between bothunits has
been lost
Pair the camera and monitor again. See
5.2.8.5.
8. TECHNICAL SPECIFICATIONS
Frequency
2.4GHz FHSS
Operating Range
250m (straight line and open space)
Nº of configurable channels
4
Power (parent unit)
Input: 100-240VAC 50/60Hz Output: 5V 800mA
Rechargeable battery for monitor
3.7V 900 mAh
Power (baby unit)
Input: 100-240 VCA 50/60Hz Output: 5V 800mA
Operating time with battery fully charged (parent
unit)
Approximately 5 hours
LCD Screen size
1.77’’
9. PRODUCT DISPOSAL INFORMATION
· Remember to dispose of the product responsibly.
· Do not mix products bearing the crossed -out bin symbol with your general household waste.
· For the correct collection and treatment of these products take them to the collection points
designated by your local authority.
Alternatively contact the retailer who sold you the product.
Hereby, Miniland S.A. declares that this 89178 digimonitor 1.8” is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/UE.
