miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
16
3.4
NANO
AVR
HD
TO NANO
AVR
DL
UPGRADE
If you have purchased an upgrade to convert a nanoAVR HD to a nanoAVR DL, follow the steps below. (If you
purchased a nanoAVR DL, you do not need to do anything on this page.)
1.
Update the firmware to the nanoAVR DL version. The procedure is described in MCU Firmware Update
starting on page 45. You must use the firmware file included in the nanoAVR DL utility software download,
in the firmware folder. It will have a name like nanoAVR_DL_v1_29.hex.
2.
Power-cycle the hardware unit: remove power, wait a few seconds, and then reconnect power.
3.
Start the nanoAVR DL Utility. Click the Connect button (towards the top right).
4.
The following screen will appear:
5.
Click on the button “Copy Activation Code to Clipboard.”
6.
with the Subject line “NanoAVR DL Activation Request.” In
the body of the email message, paste the activation code from the above step.
7.
miniDSP will respond in normal (Hong Kong) working hours with an activation key file (.txt file). (Please
note that this is not an automated process.) This file contains a key text string consisting of 128 pairs of
letters separated by spaces (total 256 letters). Save this file to disk.
8.
Click the “Import” button and select the received activation key file to import into the plugin. If successful,
the Connect button will change to show that you are connected:
