miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
16
5.3
W
INDOWS
Note: playing USB audio from Windows requires that the UAC driver package be installed first (page 22).
5.3.1
Windows default audio device
To set the HA-DSP as the default audio output device, open the Windows Control Panel and navigate to the
Audio Devices section. On the Playback tab, select “HA
-
DSP” and click on the “Set Default” b
utton.
To change the bit depth and sample rate, click on the Properties button and select the Advanced tab. Drop down
the selection menu, choose the desired value and click OK. Select a sample rate up to 192 kHz. Note: Sample
rates higher than 192 kHz are an artifact of DSD128 support. Do not select these for normal (PCM) playback.
