miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
10
4
C
ONNECTIONS
Note: leave the rear panel switch in position 2 regardless of input source.
4.1
A
NALOG INPUT
To connect an analog source, plug a 3.5 mm stereo plug into the input jack. The HA-DSP will automatically detect
the analog input and switch to it. USB Audio will be disabled. You can use:
•
The supplied 3.5 mm to 3.5 mm cable. This short cable is perfect for connecting to a phone.
•
Any other stereo cable with a 3.5mm stereo connector. For example, in some cases, the source may have
RCA jacks. In that case, use an RCA to 3.5 mm adapter cable.
This diagram shows two typical connection examples:
