Minicom 5UM20114 Operating Manual Download Page 51

Page: 51 / 87

OPERATING GUIDE

Name of user-entry object class

- The object class that identifies a user in the

LDAP directory. To use the default leave this field empty. The default depends on
the selected LDAP server type.

User search subfilter

- Refine the search for users that should be known to the

Smart 16 IP.

36. Maintenance

From the Smart 16 IP Menu choose Maintenance. The Smart 16 IP Maintenance
window appears.

Board Summary

- This contains information about the Smart 16 IP and its

current firmware.

Updating firmware

You can receive firmware updates by email or download them from the Minicom
Web site. Save the firmware file on the client computer.

To update the firmware:

1. Scroll down the Maintenance window. Under Maintenance features click

Update Firmware. The Update Firmware window appears. See Figure 35.

Figure 35 Update Firmware window

2. Locate and upload the firmware file from your client system. In case of any

errors the upload will be aborted.

After a smooth upload the Update Firmware panel appears showing the current

firmware version number and the uploaded firmware version number.

3. Press the Update button. The firmware updates. Warning! This process is

irreversible; ensure the Smart 16 IP's power supply won't be interrupted during
the update process, as this may cause damage.

4. When prompted reset Smart 16 IP manually by pressing the

button. When pressed all connections to the administration

or Remote console close. 30 seconds later, Smart 16 IP runs with the new
firmware. You must login again.

Attention

: Only experienced staff members or administrators should perform a

firmware update.

Summary of Contents for 5UM20114
























































































Search results

Summary of Contents for 5UM20114

Reviews:

Related manuals for 5UM20114

Brands by name

Popular brands

Minicom 5UM20114, Operating Manual

Search results

Summary of Contents for 5UM20114

Reviews:

Related manuals for 5UM20114

Brands by name

Popular brands