SMART CAT5 SWITCH 16 IP
.
51
Direct SmartIP Links
You can set up direct links to any Minicom IP hardware over a LAN or WAN.
Use the links to directly connect to these IP units without having to remember
their IP addresses. You can also see the status of the remote IP units as explained
below.
All the IP units must have firmware that supports direct connection functionality.
Ensure that firmware of all units is updated to the latest version. See the User
Guide of each IP unit to update the firmware.
To set up the direct connections:
1. Scroll down the Maintenance window to Maintenance Features. See Figure 36.
Figure 36 The Maintenance Features
2. Click Direct SmartIP Links. The Direct Connection Links page opens.
See Figure 37.
Figure 37 The Direct Connections Links page
3. In the IP address column, type IP addresses of the other Minicom IP units. For
up to 16 entries press
.
Summary of Contents for 5UM20114
Page 87: ...OPERATING GUIDE 86 ...
