KVMS EXTENDER
11
To change a setting:
1. Press the keyboard number to enter the setting.
2. Press the keyboard letter of the desired option.
3. Press
Enter
until a confirmation appears that the settings are saved. Once saved
you exit the option.
Or
Press
q
to exit the option without saving.
4. Press
Esc
to exit the KVMS settings.
Note 1:
Video quality adjustments can also be done using a hotkey with 6 preset
adjustments as explained in the Video brightness and tuning section below.
Note 2:
Settings 0-5, only apply to the dual control scenario.
0 Video
You can have the screen appear at both Transmitter and Receiver positions, or only
at the currently active position.
Tip!
For an extender application set the video
display to appear at both positions.
1. Press 0. Text appears showing that you are in the video display mode.
2. Press
b
to have both positions display the video, or press
c
to have only the
active station showing the video.
3. Press
Enter
twice to save and exit the option.
The rest of the settings are explained below. To change them follow the steps as
outlined at the beginning of this section.
1 Serial control
You can have serial control at either the Transmitter (local) or at the Receiver
(remote) or at whichever position takes control (active).
Tip!
For an extender
application set serial control to be at the remote position.
2 Lock
Lock disabled allows the currently non-controlling position to take control by the
method outlined below in
3 Take control
.
When Lock is enabled, control can be locked at one position preventing the other
position from taking control.
Section
14 on page 15 explains how the system operates when Lock is disabled or
enabled.
Summary of Contents for 1DT50001
Page 23: ...USER GUIDE 22...
