Kit Assembly (1033-3)
Your Whiplash kit will require a number of different supplies and tools to ensure the best final result. They are
as follows:
Required Lubricants and Compounds:
1. Medium Strength Thread Locking Compound - Loctite 243 Blue (MA3200-20)
2. Tri-Flow Oil (MA3200-12)
3. Synthetic Grease (MA3200-11)
4. Medium Cyanoacrylate (CA)
5. Retaining Compound - Loctite 648 Green (MA3200-22)
Required Tools:
1. M4 Nut Driver
2. M5 Nut Driver
3. M5.5 Nut Driver
4. M7 Nut Driver
5. 1.5mm Allen Driver
6. 2.0mm Allen Driver
7. 2.5mm Allen Driver
8. 3.0mm Allen Driver
9. 4.0mm Allen Driver x2
10. 5.0mm Allen Driver
11. Needle Nose Pliers
12. Phillips Screwdriver
13. Razor Knife (X-acto)
Other required components:
The X-Cell Whiplash is an airframe kit. To complete the model, several other items are required but are not
included with the kit. There are many choices for these other required components, and any competent
hobby retailer with R/C helicopter experience will be happy to make suggestions. You will need:
1. Engine, 23-29cc R/C format gas engine
2. Helicopter style muffler suited to the engine you choose.
3. Cyclic servos (Miniature Aircraft recommends high quality digital cyclic servos with no less than 80 oz.
in. of torque.)
4. Throttle servo (Miniature Aircraft recommends a high quality ball bearing sevro)
4. R/C helicopter gyro (Miniature Aircraft recommends for Flybarless Kits a flybarless electronic unit with
rudder gyro)
5. Rudder servo suitable for use with the gyro you choose. Digital servo is recommended.
6. R/C helicopter transmitter and receiver with at least 6 channels, and eCCPM capabilities.
7. 690-720mm Main Blades and 105mm Tail Blades
8. R/C helicopter starting and fueling equipment compatible with gasoline fuel
9. R/C helicopter engine governor is recommended
Refer to the “Whiplash Gas User Guide” on page 32 of this manual for more information on
recommended equipment and setup.
5
