0056
0056
0056 x 2
M3x5 Dog Point
Socket Screw
Hardware for
this assembly
Assembly Tip
• Ensure the dog point tip is seated
into the dimples on the tail rotor
shaft.
Hardware for
this assembly
Apply Loctite 648 when
mounting the bearing at the
sleeve
2-A-4
0049-1 x 2
M2x12 Socket Bolt
0020-1 x 2
2mm Lock Nut
0001 x 4
2mm Steel Washer
X2
0001
0001
0020-1
0868-5
0049-1
128-144
FRONT
131-482
2-B-1
131-481
131-480
131-485
Take care about the orientation of guide
edge of the sleeves, all facing to the tail.
Install all bearing cup assemblies facing the
same direction on torque tube.
Apply a small amount of Loctite 648 when
mounting the bearing cup assemblies at the
torque tube.
X3
TAIL
15
