Mini 2009 Clubman, Owner'S Manual

Page: 89 / 160

REFERENC
E
AT
A
GL
AN
C
E
CO
NT
R
O
LS
D
R
IV
ING
TI
P
S
MOB
IL
ITY
87
By way of example, the illustration shows the
cargo compartment in the MINI.
1. Pull the lever, arrow 1 , and fold the rear seat
backrest forward.
2. Fold up the lever of the backrest lock until it
audibly engages, arrow
2
.
3. Fold back the backrest until it engages.
If the rear seat backrests are positioned at
a steeper angle, do not install child-
restraint systems in the rear of the vehicle as
their protective features may be ineffective.
<
Partition net*
Ensure that the partition net is firmly
attached, otherwise injuries may occur.
<
The partition net can be mounted in the cargo
bay or behind the front seats.
In the cargo bay
1. Fold the rear seat backrest forward if neces-
sary, page
86 .
2. Insert each partition net mounting pin all the
way into its respective rear mount in the
headliner, arrow
1 , and push it forward.
3. Hang the hooks of the partition net into the
eyelets on the cargo bay floor, arrow
2 .
Behind the front seats
1. Fold down the rear seat backrests, refer to
Expanding the cargo bay.
2. Insert each partition net mounting pin all the
way into its respective front mount in the
headliner, arrow
1
, and push it forward.
3. Fold up the eyelets on the rear seat and
hook the partition net into them, arrow
2 .
Level load floor*
The maximum load capacity of the level
load floor is 165 lb/75 kg. For the storage
compartment under the load floor, do not
exceed a maximum load of 55 lb/25 kg, other-
wise damage may occur.
<
Raise the level load floor and fold it up toward
the front, arrow.
Removing
1. Fold up the level load floor.
2. Pull the load floor back slightly.
3. Then take it out toward the top.
PDF Decrypter Trial
Website : http://www.softlay.org