Mini 2009 Clubman Owner'S Manual Download Page 108

Page: 108 / 160

Under th

e bo

nnet

106

Important parts of the engine compartment

Battery, under the cover

125

Engine oil dipstick

106

Engine oil filler neck

107

Coolant expansion tank

107

Reservoir for washer fluid for the headlamp
and window washer system

Engine compartment fuse box

123

Engine oil

The engine oil consumption is dependent on
driving style and driving conditions.

Checking engine oil level

With the vehicle's engine at normal operat-
ing temperature, i.e. after uninterrupted
driving for at least 6 miles/10 km, park the
vehicle on a level surface.

Switch off the engine.

Pull the dipstick out after approx. 5 minutes
and wipe it off with a lint-free cloth, paper
towel or similar material.

Carefully push the dipstick all the way into
the guide tube and pull it out again.
The oil level should be between the two
marks on the dipstick.

The oil quantity corresponding to the difference
between the two marks on the dipstick is 1 US
quart/1 liter.

Do not fill beyond the upper mark on the
dipstick. Excess oil will damage the

engine.

PDF Decrypter Trial

Website : http://www.softlay.org

Summary of Contents for 2009 Clubman

































































































































































Search results

Summary of Contents for 2009 Clubman

Reviews:

Related manuals for 2009 Clubman

Brands by name

Popular brands

Mini 2009 Clubman, Owner'S Manual

Search results

Summary of Contents for 2009 Clubman

Reviews:

Related manuals for 2009 Clubman

Brands by name

Popular brands