Mini Pro Chassis Dyno V2, Instruction Manual

Page: 18 / 24

17
ESC Controller Sensor Driver Installation
DRIVER INSTALLATION
After installing the drivers and plugging the ESC Controller Sensor in via USB, if you go to your
computer’s Device Manager, you should see three entries for the Sensor that look like what is
shown below:
3
Connect the sensor to the pc using the
mini-b USB cable.
Run setup.exe.
The installer will guide you through the
steps required to install the sensor.
1 2
CONT.
Go to -->https://support.minipro.com/095696-Drivers
Download the latest driver and extract the driver to a
new folder.
During the installation, Windows will ask you if you want
to install the drivers. Click “Install” (Windows Vista, Win-
dows 7, and later).
4
Done!
If you have any questions, please go to support.miniprousa.com and submit a ticket.
NOTE: After you completed a pololu driver installation, the two COM ports might not rename automatically. You must right
click the COM port and select “Update Driver” on each one, or the sensor won’t work properly.