Mini Pro Chassis Dyno V2, Instruction Manual

Page: 11 / 24

10
Adjust Wheelbase Install Belt Straps on Vehicle
9
Adjust Belt Tension
8
NOTE: If you are using your Motor Dyno Flywheel Assy then
you need to remove the belt shield and holder from the dyno.
Install the Flywheel Base Install the Flywheel Assy. , Pulley and
Belt
ASSEMBLY GUIDE
6 7
Install the (4) M3 screws below the flywheel
base
More
Tension
Less
Tension
Unscrew to set
tension of belt
Uncrew to adjust wheelbase
Adjust Tension of the Belt Straps
10
Uncrew to adjust upper deck and tension of the straps
Install (4) M5 screws with (3)
T-nuts to fix the flywheel unit.
NOTE:
Make sure you don’t apply too
much tension (load) to the flywheel unit
to damage in the flywheel.
CONT.