2
Chapter 2 – Installation and Setup
System requirements for the switch are a computer (Pentium II or better) with support for USB
HID
.
To run the GUI program a Windows operating system for either 32 or 64 bits is also
required. For secondary control methods (I
2
C, SPI, etc ) a master unit supporting those control
methods may be needed.
2.1
Software Setup
If you have had any problems installing the software, we’re here to help.
Try following these complete step-by-step instructions. If you still experience problems,
give us a call at Mini-Circuits Worldwide Technical support. It’s (718) 934-4500 or e-mail
[email protected] for North America, or go to minicircuits.com/contact/worldwide_
tech_support.html for other regional numbers and addresses.
2.1.1
First
save all work in progress and close any other programs that may be running.
2.1.2
Next,
Insert the
Mini-Circuits
CD into the CD-ROM drive, or download the full CD
software from minicircuits.com. If installing from files downloaded from the web - unzip the
downloaded files to a temporary folder on your desktop or C: drive, then open the file folder
you created and double-click the “Install” icon.
2.1.3
If
installation from the CD does not start automatically, run
install.exe
from the <CD drive> root directory.
Figure 2.1.3 CD file listing window
Page 9 of 23
AN-49-012 Rev.: (January 10, 2019) M171660 (R94356) File: AN-49-012(B).doc
This document and its contents are the property of Mini-Circuits
