1.6
Service and Calibration
The solid state switch modules do not require any periodic service or calibration. The only user
service possible for the switch is external cleaning of the case and connectors as needed. Do
not use any detergents or spray cleaning solutions to clean the switch. To clean the connectors
use an alcohol solution, and to clean the case a soft, damp cloth.
1.7
Contact Information
Mini-Circuits inc.
13 Neptune Ave
Brooklyn, NY 11235
Phone: 1-718-934-4500
General Fax: 1-718-332-4661
Sales / Customer Service Fax: 1-718-934-7092
For regional offices and tech support see
http://www.minicircuits.com/contact/offices.html
1.8
Technical description
1.8.1
Features of Mini-Circuits Switch modules
• Absorptive solid state switch
• Wide band frequency range (model dependant).
• High speed switching
• Electronic switching; high isolation; high reliability, life not related to switching cycles.
• High power handling (model dependent)
• All RF ports SMA(F)
• Programmable, timed switching sequence
• Easy GUI installation and operation, simplifies complex switching and timing setups
• USB HID ”plug & play” device
• ActiveX com object and .Net class library for use with other software: C++, C#, CVI
®
, Delphi
®
, LabVIEW®
8 or newer, MATLAB
®
7 or newer, Python, Agilent VEE
®
, Visual Basic
®
, Visual Studio
®
6 or newer, and
more(see programming manual and application note
AN-49-001
for details)
• User friendly Graphical User Interface for any Windows® 32 or 64 bit computer command line support
for Linux
®
computers
• All power via USB
For Additional details, performance data and graphs, outline drawing, ordering information and
environmental specifications, see our catalog at:
https://www.minicircuits.com/WebStore/PortableTestEquipment.html
Page 6 of 23
AN-49-012 Rev.: (January 10, 2019) M171660 (R94356) File: AN-49-012(B).doc
This document and its contents are the property of Mini-Circuits
