Page 9 of 39
AN-49-005 (December 23, 2019) M176825 (R95497) File: AN-49-005(J).doc
This document and its contents are the property of Mini-Circuits
Additionally the HTTP and Telnet protocols can operate from almost any computer, or even a
mobile device/smartphone with a network connection.
For more information see
1.8.5
Included Accessories and Options
1.8.5.1
All models
are supplied with
•
2.6 ft (0.8m) USB cable (Type A to Type Mini-B)
1.8.5.2
The following additional accessories are also available:
•
Mounting bracket
•
6.9 ft (2m) USB cable (Type A to Type Mini-B)
•
6 ft (1.8m) RS232 cable (9 Pin D-Sub Male-Female)
•
3 ft (0.9m) RS232 & SPI cable (9 Pin D-Sub Male-Pigtail)
•
5 ft (1.5 m) Ethernet cable: RJ45(Male) to RJ45(Male) Cat 5E cable
•
AC/DC power adapter suitable for a wide selection of wall sockets
•
1.5 ft (0.5m) Interconnect data cable for daisy chain dynamic addressing.
•
5 ft (1.5m) Interconnect data cable for daisy chain dynamic addressing.
1.8.6
Conformity
Mini-Circuits series of programmable attenuators conform to all requirements for the following
international standards
:
RoHS – The models comply with EU directive for Restriction of Hazardous Substances
for 6 substances.
USB 2.0 – The models meet the specifications of the Universal Serial Bus Ver. 2.0
communication standard as described by USB-IF.
USB HID – The models meet the requirements for Universal Serial Bus Human
Interface Devices according to USB-IF’s Device Class Definition for Human
Interface Devices firmware rev. 1.11
RUDAT series models also comply with:
RS232 – The RUDAT series models meet all requirements for RS232 standard.
RCDAT series models also comply with:
TCP/IP – The
RCDAT series models’ Ethernet communication complies with the
specifications of the Transmission Control Protocol (TCP) and Internet
Protocol (IP) as defined in RFC 791 and RFC 793.
HTTP – The RCDAT series models’
support all requirements for communicating with
the Hypertext Transfer Protocol
(HTTP)
as defined in RFC 1945.
Telnet – The
RCDAT series models’ support all requirements for communicating with
the Telnet protocol, as defined in RFC 854
SSH – RCDAT models which specify SSH control also support the requirements for
SSH protocol, as defined by RFCs 4250-4253, 4419, 5647, 5656 and 6668.
