2
1 .Outline
1-1
. The instrument Introduction
MHS-5200A series instruments using large scale integrated circuits and
high-speed FPGA MCU microprocessor, the internal circuit to take surface mount
technology has greatly enhanced the instrument's noise immunity and service life.
Display interface using LC1602 LCD display is divided into two lines, the top line
shows the current frequency, the following line displays additional parameters or
function variable and flexible use of flip key setting, greatly enhances the operability.
This instrument signal generation, waveform scanning, as well as the use of parameter
measurement has great advantages, is an electronic engineer, electronic laboratories,
production lines and teaching, research and the ideal test, measurement equipment.
Model Description
This series of instruments in four models, the main difference is the maximum
frequency sine wave, as follows:
MHS-5200-06M sinusoidal signals at frequencies up to 6MHz
MHS-5200-12M sinusoidal signals at frequencies up to 12MHz
MHS-5200-20M sinusoidal signals at frequencies up to 20MHz
MHS-5200-25M sinusoidal signals at frequencies up to 25MHz
The instrument characteristics
1
、
Direct digital synthesis (DDS) technology, FPGA design, low power consumption;
2
、
Dual output, can work in sync phase adjustable
；
3
、
It has up to 999 seconds of linear and logarithmic sweep function Sweep
；
4
、
With a sine wave, triangle wave, square wave, sawtooth rise, falling sawtooth
waveform basic function and variable duty cycle pulse wave, but also has 16 sets of
arbitrary waveform customized by the user;
5
、
A total of 10 sets of parameters stored bits have M0 ~ M9, M0 boot automatically
transferred out of data;
6
、
At 12MHz or less, the sharpest of up to 20Vp-p, more than 12MHz, the biggest
reach 15Vp-p;
