Minebea CSA-593, Instruction Manual

Page: 6 / 24

IV
2. Power supply
Warning
Be sure to check that power supply is OFF when installing each cable. If an operator works with
power ON, operator may have an electric shock or the instrument may be destroyed.
Warning
Before supplying power, check the indication of power voltage/specifi cations to be identical with
supplied power. If they are not identical, contact with Minebea. Without checking the above,
operation may cause damage to the instrument or electric shock.
Caution
Be sure to ground a grounding wire.
If a grounding wire is not grounded, it may cause malfunction of the instrument or an electric shock
to an operator.
3. Note for usage
Caution
When using the instrument, check that wires are connected properly. If neglected, correct
measurement cannot be obtained and it may cause malfunction in the instrument or cause damage
to peripheral devices or a critical accident.
Caution
Do not give the instrument such a shock as throwing something at it. It may cause damage or
destroy electrical circuits and even have loose resistance to environment or operability.
Caution
Do not remove the cover of the case of the instrument, nor peel off the panel sheet nor take the
instrument into pieces. If neglected, it may cause damage to the case and the panel sheet and even
have the possibility of damage to resist to environments or operational performances.