1
1
．
General
This instrument is a transmitter for tie-bar gage (350
Ω
type / two pieces set).
2
．
Each name and function
(3) Connector for tie-bar gage (for SENSOR)
Connect a tie-bar gage through connector.
(4) I/O connector (I/O)
Connect a power supply and Input/Ooutput cable through a connector.
(5) Main body fixation hole
This is a hole to fix a unit. M6 screw is used for fixture.
Please fix by main body fixation hole (A) and (C) usually.
( * The screw for fixation is not attached. Please prepare the threaded hole processing on the
installatin side.)
(6) Protective ground terminal
Please ground this unit to prevent the noise such as static electricity. Please do not connect this
terminal other than the earthing conductor.
This terminal is common with the shielded terminal of a connector for tie-bar gage internally.
②
Input/Output connector
（
I/O
）
③
Fixing hole
（
C
）
①
Connector for tie bar gage
（
SENSOR
）
④
Protective ground terminal
③
Fixing hole
（
A
）
③
Fixing hole
（
B
）
Summary of Contents for CSA-593
Page 2: ......
Page 9: ...VIII 9 WARRANTY AND REAPIR 12 9 1 WARRANTY 12 9 2 REPAIR 12 ...
Page 10: ...VI ...
Page 23: ... ...
