Minebea Intec PR1625/60, Instrument Manual

Page: 9 / 92

Instrument Manual PR1625/60
Minebea Intec EN-7
2 Safety Instructions
2.1 Intended Use
The PR1625/60 is an instrument to intrinsically safe interface electrical equipment situated in a
hazardous (Ex) area with electrical equipment situated in a safe area.
The instrument reflects the state of the art. The manufacturer does not accept any liability for damage
caused by other system components or due to incorrect use of the product.
Commissioning and maintenance may be done only by qualified or trained personnel who know the related
risks and avoid them, or take measures to protect themselves.
2.2 Explosion Protection
The instrument fulfils the basic requirements of EN 50014 and EN 50020.
It complies with the requirements for ignition protection class II (2) G [EEx ib] II B or II (2) G [EEx ib] II C
and has the type approval certificate number PTB 02 ATEX 2056.
This approval number is printed on one side of the instrument. A copy of the approval can be looked up in
chapter 8 of this manual.
This instrument has been supplied in a safe condition.
The following important information and warnings must be followed by the user in order to ensure a safe
operation and to maintain the instrument in a safe condition.
2.3 Initial Inspection
Check the contents of the shipment for completeness and note whether any damage has occurred during
transport. If the contents are incomplete, or there is damage, a claim should be filed with the carrier
immediately, and the local organisation of Minebea Intec should be notified in order to facilitate the repair
or replacement of the instrument.