Minebea Intec PR 6202, Installation Manual

Page: 69 / 70

1
Blatt
Sheet
1
von
of
Maßstab /
Scale
1:1
Ausgabe / Revision
04
Material
4012 101 5688
Benennung / Title
Änderung / Alteration
PA50180542
Zeichnungs-Nr. / Drawing number
592
Teildok. Nr./
Part doc. no.
Hazardous (Classified) Location
Class I, II, III, Division 1, Groups A,B,C,D,E,F,G
2)
Hazardous (Classified) Location
Class I, II, III, Division 2, Groups A,B,C,D,E,F,G
2)
Notes
1) In the USA : The installation must be in accordance with the National Electrical Code
®
, NFPA 70 and
ANSI / ISA-RP 12.06.01.
In
Canada : The installation must be in accordance with the Canadian Electrical Code
®
, Part 1.
2) The apparatus must not be connected to any device that uses or generates in excess of 250Vrms or DC.
U
m
= 250V.
3) In the USA : The Apparatus must be connected to a suitable ground electrode per National Electrical Code
®
,
NFPA 70, Article 504. The resistance of the ground pad must be less than 1 ohm.
In
Canada : The Apparatus must be connected to a suitable ground electrode per Canadian Electrical Code
®
,
Part 1. The resistance of the ground pad must be less than 1 ohm.
The load cell ground (housing) must be insulated from the surface on which it is mounted or be at the same
potential of the NRTL approved apparatus ground as per installation drawings.
4) of the NRTL approved
apparatus.
5) The Entity Concept allows interconnection of intrinsically safe apparatus with associated apparatus not
specifically examined in combination as a system when the approved values of Vo and Io of the associated
apparatus are less than or equal to Vi and Ii of the intrinsically safe apparatus and the approved values of Co
and Lo of the associated apparatus are greater than Ci and Li of the intrinsically safe apparatus plus all cable
parameters.
7) Ambient temperature range:
-40°C .... +55°C (-40°F .... +131°F) for T5 and -40°C .... +70°C (-40°F .... +158°F) for T4A.
8) WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY.
AVERTISSEMENT: LA SUBSTITUTION DE COMPOSANTS PEUT COMPROMETTRE LA SÉCURITÉ
INTRINSÈQUE.
Ui = 25V, Ii = 0.16A
Pi = 2W
Li = 0, Ci = 0
3)
4)
4)
FM Approved Apparatus (USA) or
product is suitably certified for use
in Canada with nonincendive field
wiring and output voltage of
25Vmax to the load cells.
FM Approved Apparatus (USA) or
product is suitably certified for use
in Canada with Entity Concept
parameters (see note 5) (Vo, Io,
Co, Lo) appropriate for connection
to intrinsically safe apparatus with
Entity Concept parameters
3)
3)
3)
Vmax = 25V
Minebea Intec
Load Cell Series PR62..
Minebea Intec
Load Cell Series PR62..