Minebea Intec Inteco PR 6203, Installation Manual

Page: 34 / 42

11.2.5.3 Mounting options
The Connexx module is delivered with mounting elements.
It is possible to mount the Connexx module in the following ways:
- Mounting using a retaining plate, see Chapter 11.2.5.3.1
- Mounting using a mounting bracket, see Chapter 11.2.5.3.2
- Mounting using a mounting rail holder, see Chapter 11.2.5.3.3
11.2.5.3.1 Mounting using a retaining plate
When using a retaining plate, the Connexx module is attached to the weighing device
(e.g. the leg of a container).
Note:
Minebea Intec recommends using a stainless-steel cable tie when mounting using a
retaining plate.
. Thread the stainless-steel cable tie through the lugs (1) on the retaining plate (2) and
attach to the weighing device.
Compression load cell Inteco® PR 6203 11 Spare parts and accessories
EN-32 Minebea Intec