Minebea Intec EF-IN4P, Operating Instructions Manual, Page: 43 / 69

— CAL Initiates a two-point calibration (zero and max.
load)
— LIN Initiates a linearization (zero, half weighing
range and max. load)
— GEO The adjustment of the calibration based on the
current location is carried out using the
geographic adjustment factor (GEO). (Settings
from 0 … 31, default value = 12)
— END Exit menu level
— D Enter increment
— CAL.WGT Enter calibration weight
— MAX.CAP Enter max. load
— TYPE Display model name
— SER.NUM Display serial number
— S.APPLI Application menu
— OFF Unlock*
— ON Locked
— S.UNIT Unit menu
— OFF Unlock*
— ON Locked
— S.OP.FUN Operating functions menu
— OFF Unlock*
— ON Locked
— S.METRO Metrology menu
— OFF Unlock*
— ON Locked
— S.PRINT Printer output menu
— OFF Unlock*
— ON Locked
— S.PR.COM Printer communication menu
— OFF Unlock*
— ON Locked
— S.PC.OUT PC output menu
— OFF Unlock*
— ON Locked
— S.PC.COM PC communication menu
— OFF Unlock*
CAL.ADJ
5.3.2.10 [ADC.CON] menu selection
The scale can be calibrated and adjusted in this menu (see Chapter 5.4 ).
ADC.CON
5.3.2.11 [INFO] menu selection
INFO
5.3.2.12 [SECURE] menu selection
The safety setting (lock) for menu access can be defined via this menu in order to prevent
unauthorized interventions.
Factory settings are marked with "*"
SECURE
Weight indicator Puro® 5 Operating
EN-40 Minebea Intec