3.2
Connections
1
2
3
4
Pos.
Description
1
Accessories
2
DC IN USB-C
3
Printer port
4
LC (load cell)
3.2.1
Electrical supply
The scale is supplied using a power supply unit, unless a battery supply is required.
Connect the USB-C male plug connector with the USB-C female plug connector on the
underside of the device, then connect the power supply unit to the wall socket.
Note:
Do not use the USB-C connector cable for the PC communication. Instead, use a
standard USB-C cable.
3.2.1.1
Battery power
The scale can be operated immediately with the power supply. In order to operate the
scale with the battery, the battery should first be charged for 12 hours. If there is a power
outage or if the power cord is disconnected, the scale switches into battery operation
automatically. In the event of supply via a power supply, the battery is constantly charged
meaning that the battery charging display (see Chapter
) is continuously illuminated.
The scale can be used during the charging process; the battery is protected against
excess charging.
When the device is switched on, the battery status LED illuminates in red while the battery
is charging, and it goes green when the battery is fully charged.
The battery must be charged in a dry environment. For a maximum operating time, the
battery should be charged at room temperature.
During battery operation, the battery icon displays the battery’s remaining charge status.
The display switches off automatically when the batteries are empty.
Weight indicator Puro®
3 Device installation
EN-8
Minebea Intec