Minebea Intec EF-IN4P, Operating Instructions Manual, Page: 37 / 69

— APPLIC Application (see Chapter 5.3.2.1 )
— METRO Metrology (see Chapter 5.3.2.2 )
— UNIT Weight units (see Chapter 5.3.2.3 )
— OP.FUNC Operating functions (see Chapter 5.3.2.4 )
— PRINT Printer outputs (see Chapter 5.3.2.5 )
— PRN.COM Printer port communication (see
Chapter
5.3.2.6 )
— PC.OUT PC output (see Chapter 5.3.2.7 )
— PC.COM PC port communication (see Chapter 5.3.2.8 )
— CAL.ADJ Calibration/adjustment (see Chapter 5.3.2.9 )
— ADC.CON ADC configuration (see Chapter 5.3.2.10 )
— INFO Info (display of serial number and type
designation)
— SECURE Block menu items (see Chapter 5.3.2.12 )
— E.N.D. Exiting menus
— WEIGH Weighing
— OFF deactivated
— ON activated*
— COUNT Counting
— OFF deactivated
— ON activated*
— CHECK Checking
— OFF deactivated*
— CHE.WEI Check Weighing activated
— CHE.CNT Check Counting activated
5.3.2 Menu navigation
Overview of the options of the menu mode:
5.3.2.1 [APPLIC] menu selection
The application to be used can be selected in this menu.
Only activated applications can be called up using the
Mode
F
(mode) key.
Factory settings are marked with "*"
APPLIC
5. When [END] is displayed, press the
Off
(Yes) key in order to return to the options
from the sub-menu.
6. Press the
Unit
(No) key to return to the first item in the current menu.
7. Press the
Menu
M
+
key to exit the menu.
Weight indicator Puro® 5 Operating
EN-34 Minebea Intec