Mine Site Technologies NS40 I.S., User Manual, Page: 67 / 98

5.1.1 Site Configuration
This editor contains the option to
Set new Access Points as Managed
- If checked, all newly discovered
Access Points will be configured according to the
Site Default
template by the ICA. If disabled, new APs
must either have their management settings configured in the Devices > Access Points editor, or be
configured manually.
5.1.2 AP Config Templates
The ICA is installed with one AP Template:
Site Defaults
. This is a special AP Template which defines
the settings that new APs will automatically pick up if
Set new Access Points as Managed
is ticked in
the Site Configuration editor. This template cannot be deleted, but new templates can be copied from it
and modified separately.
Note: Once a template is applied to an AP, any manual changes made to settings listed in the
template will be reverted automatically to the template default. Settings that are not defined by the
template can be changed freely.
NS40 I.S. Wireless Network Switch 67 Revision C
Centralised Configuration Management