Standalone Physiology Recording
1. Insert an SD Card
2. Attach signal leads to the Mobile Impedance unit
3. Power on with the
Run
(
) button
4. Choose
Local
mode
5. The main screen summarizes the acquisition settings
a. See the full Local Mode documentation for details on the summary
6. Press
A
to enter Pre-Acquisition
a. Use the left and right arrows to verify signals
7. Press
B
to start acquisition
a. Acquisition time will update in 5-second increments
b. Do not remove the SD card when the lock ( ) is displayed
8. Hold the
left and right
arrows to unlock the acquisition and press
A
to exit
acquisition
9. Press
B
to open the menu and select
Power Off
to turn off unit
Local Mode
MindWare Mobile
Impedance Cardiograph
The following is a basic “Quick Start Guide”. For more details regarding the
operation of the MindWare Mobile Impedance Cardiograph, please refer to the
full product manual found on the MindWare USB flash drive containing the
software installers.
For help please contact: [email protected]
Quick Start Guide
MindWare Technologies LTD.
www.mindwaretech.com
