Made in USA
0981
Wifi Mode
Wireless physiology recording
1. Install BioLab on the PC from either the provided USB flash drive or from
http://www.mindwaretech.com
2. Attach the BioNex or Wireless Data Center over USB and start BioLab
3. Attach signal leads to the Mobile Impedance unit
4. Power on with the
Run (
) button
5. Choose
Wifi
mode
a. See the section on wireless settings for detailed instructions
6. Wait for the wireless network status to be Connected
7. If it is not already, put BioLab into Ambulatory Wifi mode
8. Press
A
to start the auto-connection to BioLab
9. Wait for the Mobile Impedance unit to show up in BioLab
10. Enable the Mobile unit and choose up to 4 channels to record
11. Repeat for multiple Mobile units
12. Click
Connect
in BioLab to establish connections with all selected Mobile
units
13. Choose
Acquire
to enter the acquisition screen and save an acquisition file
14. Press
Start/Stop
to begin acquisition
15. Press
Start/Stop
to end acquisition and choose
Exit
to leave acquisition
mode
16. Press
Exit
in BioLab to exit the application
17. On the Mobile unit, press
B
to enter the menu and choose
Power Off
to
turn
off
the unit
Quick Start Guide
MindWare Technologies LTD.
www.mindwaretech.com
