Mindray UA-66, Operator'S Manual

Page: 16 / 40

UA-66 Urine Analyzer Operator’s Manual
- 8 -
instrument.
1. Be sure that the instrument is in idle state, press
ESC
until the display return to the main
menu.
2. Lift the printer cover on the top of the instrument.
3. Remove the used paper roll core.
4. Place a new roll of paper into the printer, with the paper unrolling from the beneath.
5. Feed the paper under the roller, and to advance the paper through the printer press
►
.
If the
paper does not catch immediately, gently feed the paper into the roller while continuing to
press
► .
To make insertion easier, be sure the leading edge is a clean, straight cut; trimming
the paper to a point may also assist in easier insertion.
6. Allow 4-5 cm of paper to advance through the roller, the feed the paper through the opening
on the printer cover. Place the lip of the cover under the ledge on the instrument opening and
close the cover. Press down firmly on the back of the cover until it snaps into place.
2.8 Adjust the Display
1. Open the printer cover on the top of the instrument.
2. Adjust the potentiometer (see Figure 2.6 ) using a suitable driver, scroll to find a position
where the contrast of the screen is the most suitable.
Potentiometer
Figure 2.4
3. Replace the printer cover.
2.9 Introduction of Software
Figure 2.5 shows the main menu of the instrument. The main menu is the entry of a multi-level
menu system, from which all the user-selectable functions can be accessed. The main menu
displays the date, time and the software version.
The main menu lists 3 menu items, “Test”, “Reports” and “Options”. The item surrounded by a
shadowed box is the item being selected.