Mindray M7Vet, Operation Note

Page: 13 / 43

9
6
Select Probe and Exam Mode
After directly connecting a probe or connecting probes via the probe extend module,
you can:
„ Select the exam mode (when only one probe is connected):
(1) Press
to open the exam switching dialogue box.
(2) Roll the trackball and press <Set> to select the exam mode.
„
Select the exam mode and probe (when more than one probe are connected):
(1) Press
to open the exam and probe switching dialog box.
(2) Roll the trackball and press <Set> to select the exam mode, and use the
left/right keys of the soft menu controls to switch the probe.