Mindray BeneView T8, Operation Manual

Page: 55 / 290

Managing Patients
4-3
4.3 Editing Patient Information
To edit the patient information after a patient has been admitted, or when the patient
information is incomplete, or when you want to change the patient information:
1. Select the [
Patient Setup
] QuickKey, or [
Main Menu
] → [
Patient Setup >>
].
2. Select [
Patient Demographics
] and then make the required changes.
3. Select [
Ok
].
4.4 Discharging a Patient
To discharge a patient:
1. Select the [
Patient Setup
] QuickKey, or [
Main Menu
]
→
[
Patient Setup >>
].
2. Select [
Discharge Patient
]. In the popup menu, you can either:
‹ Directly select [
Ok
] to discharge the current patient, or
‹
Select [
Standby
] then [
Ok
]. The patient monitor enters the standby mode after
discharging the current patient, or
‹
Select [
Cancel
] to exit without discharging the patient.