Fig. 8 select flight modes
For beginners, manual mode is a good start point, as the drone will auto stabilize its attitude during the
flight which makes it easier for pilots to control. When pilots eventually get more and more experienced
then can switch to acro mode for a real racing.
Switch layout on different remote controllers are usually different. You can change the layout of mode
switches or define more flight modes through QGroundControl. Please refer to MindRacer User Guide
document for details.
Flight Black Box - Using a SD Card
MindRacer has a micro SD (TF) card slot. MindRacer will record flight data into the SD card. It is important
for reproducing flight course either for training or maintenance purpose. So it is strongly recommended
that user inserting a SD card before take off.
The SD card must be formatted with FAT32.
FPV Camera and Display (for tiny-whoop)
FPV camera video transmitter needs to be paired with receiver before flight. The channels of transmitter is
set by a push button on the transmitter, with LED indicator showing the current selected channel and
band. The default channel setting for transmitter is B8(5945MHz).
By default you do not need to adjust any of the setting as during manufacture the default display kit has
been paired with the transmitter. In case you want to change the setting or use a different receiver than
default display kit, you need to access the the switch group on the video transmitter board.
Note during a racing match, you need to make sure your video transmitter channel setting does not
interfere with others.
The detailed frequency and channels settings are listed below (Fig. 9).
Page 9
assist/alt-ctrl
assist/pos-ctrl
assist
manual
acro
return-to-land
mission
