SETTING UP THE REMOTE WIRELESS TRANSMITTER (RS193):
Slide the black 3 position switch inside the battery compartment of the remote sensor to position (channel) 1.
On the Receiver, press and hold the button on the top of the unit (snooze/channel) for 3 seconds. This will instigate a
“search” for a remote signal.
Press the “TX” button (left side in the battery compartment of the transmitter) to force a signal to the receiver.
The remote temperature and humidity will appear on the receiver within 3 minutes.
Pressing the center button on the remote transmitter allows you to change the display to C or F.
At this point you may reattach the rear cover on the remote transmitter.
NOTE: If adding a second or third remote transmitter, simply follow the above procedure but select channel 2 or 3.
COLOR BAR GRAPHS
The color graphs are designed as an intuitive way to gauge the weather at a glance.
The left colour bar graph represents the respective In/Out temperature of the current display mode. The right graph represents
the respective In/Out humidity. As the measurements change, the number of illuminated bars change automatically.
IN/OUT TEMPERATURE & HUMIDITY RECEIVER DISPLAY
Press SNOOZE/CHANNEL button on the top of the receiver to select Indoor or Channels 1, 2, 3 or auto-channel scrolling display
modes. (Auto scrolling function will automatically cycle every 12 seconds through indoor readings and any remote transmitters
you have programmed).
CLOCK & CALENDAR
Press and Hold [CLOCK ] button to enter the clock setting mode. The 12 or 24hr will flash. Use the + or -/Zone button to adjust
and [CLOCK] button to confirm. After adjusting each value to your desired number, press “CLOCK” to confirm and move to the
next setting.
Sequential Setting Order:
12/24hr format > Hr > Min > Yr > D/M or M/D format > Month > Date > Weather Forecast > EXIT
In normal operating mode, press [CLOCK] to toggle between time, calendar and day of the week.
WEATHER FORECAST
This unit predicts weather conditions likely to develop in the next 12-24 hours based on the change of atmospheric pressure. The
coverage area is around 30-50 KM or 18.5 to 31 miles. The weather forecast being based on atmospheric pressure changes is
about 70-75% correct. As weather conditions cannot be 100% correctly forecast, we cannot be responsible for any loss or
inconvenience caused by an incorrect forecast.
SUNNY
PARTLY CLOUDY CLOUDY
RAINY
STORMY
