background image

52 

3-19 Code 39 (Code 32, Trioptic Code 39) 

Read: 
Format 

Data digits (variable) 

Check digit (optional) 

Check digit verification: The check digit is optional and made as the sum module 43 of the numerical 
value of the data digits. 
Check digit transmission: By setting Enable, check digit will be transmitted. 
Max./Min. code length: Each symbol has own max./min. code length.    If both setting of max./min. code 
length are “00”s, the setting of global max./min. code length is

 

effective.    The length is defined as to the 

actual barcode data length to be sent.    Label with length exceeds these limits will be rejected.    Make 
sure that the minimum length setting is no greater than the maximum length setting, or otherwise all the 
labels of the symbol will not be readable.    In particular, you can see the same value for both minimum 
and maximum reading length to force the fixed length barcode decoded. 
Code ID setting: Refer to Code ID setting of 

3-14 UPC-A

. 

Insertion group selection: Refer to Insertion group selection of 

3-14 UPC-A

. 

Start/End transmission: The start and end characters of Code 39 are  “*”s.    You can transmit all data 
digits including two  “*”s. 
“*”  as data character: By setting Enable,  “*”  can be recognized as data character. 
Convert Code 39 to Code 32: Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry.   
Note that Code 39 must be enabled in order for this parameter to function. 
Format of Code 32 

“A” (optional) 

Data digits (8 digits) 

Check digit   

Code 32 Prefix “A” transmission: By setting Enable, the prefix character “A” can be added to all Code 32 
barcodes. 
Trioptic Code 39 read: Trioptic Code 39 is a variant of Code 39 used in the marking of magnetic tapes 
and computer cartridges.    Trioptic Code 39 symbols always contain six characters. 
Format 

Data digits (6 digits)  $ 

Trioptic  Code  39  Start/End  transmission:  The  start  and  end  characters  of  Trioptic  Code  39  are  “$”s.   
You can transmit all data digits including two  “$”s. 

Summary of Contents for CS7290-BT












































































































Reviews: