mind alive DAVID PAL36, Operator'S Manual

Page: 20 / 23

Page 20
BEFORE YOU CALL FOR REPAIRS
If Means Response
PWR light is dim and PAL36 with PAL36 with CES is in Turn off PWR switch,
CES is unresponsive standby then turn PWR switch
back on
Light 1 flashes, then PAL36 with Battery is low Replace battery or
CES shuts off use adapter
PAL36 with CES does not turn on. Battery is dead Replace battery or
(PWR light not on) use adapter
Lights in eyeset are Eyeset not plugged Check eyeset connection
on left side only in completely
Tones in headphone are Headphone not Check headphone
on left side only/sound hollow plugged in completely connection
No sound from audio Plugged into audio Check all connections
player player incorrectly to audio player
Download is not recognized Audio player improperly Check all connections
plugged in to audio player
Volume too high/too low Adjust volume to
moderate
listening level
CES power indicator light on, but Intensity too low Moisten earlobes, turn
no CES stimulation felt intensity up, check
cable/jack connection
CES cable broken Replace cable
CES power indicator blinking CES not operating Slide CES slider to full
left, reslide to right to
desired setting
CES power indicator off while Plugged into adapter Operate on 9Volt battery
AVE session running only
Session runs but no lights and/ Preferences have been set/ Re-adjust settings and
or tones on start up, but can be saved at zero re-set preferences
adjusted manually