[7]
CES OPERATING INSTRUCTIONS
CES INTENSITY
The CES stimulus level can be adjusted at any time using the CES
or
buttons. The graph displays the current CES stimulus level as you are adjusting
it. The top-most lit LED will blink to indicate the level is being adjusted.
The intensity of the CES stimulus should be adjusted to a level so that the
stimulus is only mildly noticeable. Forty-five double blind studies have shown
that CES works at a sub-threshold level (below the level of feeling). Setting the
intensity too high may result in a mild irritation or blistering of the skin.
After a few minutes, you may notice that the intensity of the stimulation is
stronger. This is due to a normal “sweating in” to the ear clips that results in a
better electrical connection. Re-adjust the intensity to a comfortable level.
CES HINTS
The L and R LEDs do not blink during the session:
The CES system is
currently disabled. Try turning on the CES by pressing the CES button. When
the Delight Pro is plugged into a 9-volt adapter the CES is completely disabled.
Unplug the adapter and run the device from a 9V battery.
No stimulus can be felt, even with the intensity at maximum:
You may need to wet the ear clips slightly to get a better electrical connection.
Reduce the intensity, put a small amount of water, saliva, saline or
hair/electrode gel on the earlobe and re-attach the ear clip. Try adjusting the
intensity level again.
Stimulus is too strong at the lowest setting:
You may need to dry the ear
clips or adjust them slightly to increase your electrical resistance. Make sure the
ear clips are not touching any metal earrings.
Summary of Contents for David Delight Plus
Page 1: ...OPERATOR S MANUAL Usage and care of your AVE and CES device...
Page 27: ......
