23
MMRG Series
Regenerative Decel to Zero Speed
The Run/Stop switch shown in Figure 13 may be used to decelerate a
motor to a stop. Closing the switch between S0 and S2 decelerates the
motor from a set speed to a stop at a deceleration rate determined by
the ACC-DEC trim pot. Set the switch to the Run position to accelerate
the motor to set speed. Figure 13 shows the Run/Stop switch with a
potentiometer wired for bidirectional mode. For other possible wiring
setups, see pages 14 and 30.
IC501
IC502
C509
C511
C512
S3
S0
C510
S1
S2
STOP
RUN
CW
COMMON
Figure 13. Run/Stop Switch
