9
MIMLED 600 / MIMLED 1000
CLEANING AND DISINFECTION
4
CLEANING AND DISINFECTION
4.1 GENERAL SAFETY INSTRUCTIONS
4.2 CLEANING
4.3 DISINFECTION
WARNING – ELECTRIC SHOCK
The devices can conduct power and is to be treated with caution during cleaning and disinfection.
•
If there is a mains cord, please disconnect it.
•
Do not use spray cleaning and/or spray disinfection. Do not spray or allow any liquid to penetrate in
sockets or device openings.
OBSERVE SAFETY INSTRUCTIONS
Observe the general safety instructions according to Section 5.1
DISINFECTION PROCEDURES
Disinfection wipes are to be used as a standardised disinfection procedure for the support arm system of
MIMLED 600
and
MIMLED 1000
. The operator must establish hygiene guidelines and appropriate
security measures for the disinfection procedures.
RCOMMENDATION
The verifi ed and validated disinfectant MELISEPT
OL® from the manufacturer Braun Melsungen is
recommended.
Surfaces to be disinfected every working day!
After the contamination with potentially infectious material (e.g. blood, secretions or excrement), areas are
to be immediately and specifi cally disinfected.
Observe the instructions for application from the disinfectant manufacturer! (Concentration for application
and contact times)
Contact your hygiene expert for the coordination of the disinfectants and disinfection procedures in connec-
tion with your in-house requirements concerning the current hygiene status!
Disinfect according to the in-house hygiene schedule!
Observe the hygiene guidelines!
Do not spray, but wipe for surface disinfection!
OBSERVE SAFETY INSTRUCTIONS
Observe the general safety instructions according to Section 2
RECOMMENDED CLEANING OF SUPPORTS AND STANDS
•
Use a mild soap solution commercially available washing-up liquid as a cleaning agent.
•
Wipe surfaces of the light heads with a lightly dampened cloth, if necessary, use some mild soap solution
(washing-up liquid).
•
Finally dry the exterior by wiping with a soft, clean cloth (use an ASC™ antistatic cloth, if necessary)
