Mimio 280, User Manual

Page: 82 / 85

Technical and Environmental Information
Technical and
Environmental Information
This chapter contains technical information for the MimioProjector.
For product specifications and compliance information, visit the Documentation section of
the Support area of our Web site at www.mimio.com.
Usage Notice
Follow all warnings, precautions, and maintenance as recommended in this user guide.
Warnings
n
Do not look into the projector lens when the lamp is on. The bright light may hurt and
damage your eyes.
n
To avoid the risk of fire or electric shock, do not expose the projector to rain or
moisture.
n
Do not open or disassemble the projector as this may cause electric shock.
n
When replacing the lamp, allow the unit to cool down first. Follow the instructions as
described under
Replacing the Lamp
on page 67.
n
The projector has a timer to track the life of the lamp. Be sure to replace the lamp when
the projector displays the lamp warning message.
n
After replacing the projector lamp, reset the lamp hours setting. See Clear Lamp Hours
on page 51 for information about resetting the lamp hours.
n
When turning the projector power off, ensure that the cooling cycle completes before
disconnecting the power. Allow 10 seconds for the projector to cool down.
n
Do not block the light path between the light source and the lens with any object.
Doing so could cause the object to catch on fire.
n
Do not look into or point the laser pointer from the laser curtain module into any
person's eyes. Laser pointers can cause permanent damage to eyesight.
Precautions
n
Turn off and unplug the power plug from the AC outlet before cleaning the product.
n
Use a soft damp cloth with mild detergent to clean the display housing.
n
Disconnect the power plug from the AC outlet if the product is not being used for a
long period of time.
n
Use a soft dry cloth to clean the lens if needed. Be sure the projector has been turned
off and allowed to cool.
82