3
Capping station ("Cleaning the wiper and ink caps" Chapter 4 of the Operation Manual)
The surrounding area of the cap is also liable to be stained by the dust and ink. It is recommended to clean the
head frequently using the cleaning liquid for maintenance suitable for the ink used to avoid the stains on the
head.
When the solvent ink is used: Cleaning liquid for maintenance MS2/ES3/HS kit (Product No. SPC-0369)
When aqueous ink is used: Cleaning liquid bottle kit A29 (Product No. SPC-0137)
1
Move the carriage.
• Close the front cover, and press in order of the
and
key to move the carriage.
(Station maintenance/ Carriage out)
2
Open the front cover and clean the cap.
• Dip the clean stick into the cleaning liquid for maintenance
and wipe off the cap.
Cap
Wiper ("Cleaning the wiper and ink caps" Chapter 4 of the OPeration Manual)
On the wiper, the ink, dust and paper powder are liable to accumulate. Check the state of the wiper and if it is
stained, clean it.
Wiper kit 33S: Product No. SPA-0134
1
Move the carriage.
• Close the front cover, and press in order of the
and
key to move the carriage.
(Station maintenance/ Carriage out)
2
Open the front cover and clean the wiper.
• Dip the clean stick into the cleaning liquid for maintenance
and wipe off the wiper.
Stained wiper
Further, in the cases as explained below, replace the wiper with the new one in accordance with "Replacing the
wiper" on Chapter 4 of the Operation Manual.
When the wiper is deformed
When the stuck ink can not be wiped off
When the warning for wiper replacement is indicated
(When the number of wiping exceeds the set level. Refer to Chapter 4 “Changing the warning time of wiper
replacement“ of the Operation Manual)
Capping station
* Front cover is opened at the picture above.
Wiper
* Front cover is opened at the picture above.
