7
Safety Precautions
Cautions about Installation
About clamp lever
• Do not raise the clamp lever during printing and cutting.
Printing/cutting will be suspended.
• When raising the clamp lever, raise it up to the position where it is locked.
• When moving the clamp lever downward, hold the grip until it hits against the
bottom.
If you release it on the way, you may be injured due to its return action.
The End of the Medium Should Not Exceed the Slit Line on the Platen
Caution
A place exposed to direct
sunlight
On an inclined surface
A place where the temperature
or humidity
changes significantly
•
Use the machine under the follow-
ing environmental conditions:
•
Operating environment:
20 to 35°C
35 to 65% (Rh)
A place that vibrates
A place exposed to direct air
flow from an air conditioner, etc.
Around a place where fire is
used
• If the medium is set with its end exceeding the slit line on the platen, the medium may be lifted when it is
fed obliquely. This may cause damage to the head.
Medium
Medium holder
Slit line
Summary of Contents for TPC-1000
Page 18: ...18 ...
Page 19: ...D201921 13 17022012 ...
